Bright Company, Kind People - KAST Engineering

Product

download

home > products > Hipot(puncture) & Insulation Tester

Hipot(puncture) & Insulation Tester

Analog Hipot & Insulation Tester

 

  • Model : KT-5000Pi
  • This is a Hipot(Puncture) Tester combined with Insulation Tester in a set.
    It tests 2 kinds of test continuously in sequence, and any of both hipot or insulation test can be set to test first in other by the selection switch.
    Hipot Tester has the leakage current meter, so the operator can check the leakage value while testing. And the preset procedure of the Insulation Tester is very easy. Both tester judge the product to be good or bad automatically in a short time.
    This tester has many I/O ports to connect extra test system. 
  • Price : 2,550 (USD)

 

Digital Hipot & Insulation Tester

 

  • Model : KT-5000PiD
  • This is the digital type of Hipot & Insulation Tester.
  • The limit current is displayed with 4¾ digit, so the limit value can be set from 0.01 ㎃ to 19.99 ㎃ by 0.01 unit.
  • The Insulation Tester's reference value is displayed with 4¾ digit from  1 ㏁ to 2000 ㏁, and the test voltage is set at DC 1000 V.
  • In order of test sequence, Hipot Test comes first.
  • Price : 2,980 (USD)

  Hipot Test (Puncture Test) Insulation Test
Power supply AC 110 V or 220 V, 50 ~ 60 ㎐
Output voltage 2 Range of AC 0 ~ 1.5 ㎸ and AC 0 ~ 5 ㎸ 2 Range of DC 500 V and
DC 1000 V (Digital type is 1000 V)
Range of current limit until 19.99 ㎃ setting by unit 0.01 ㎃  
Range of resistance measurement   Possible to set up,
on standard value, all values of
0 ~ 1000 ㏁ from DC 500 V
0 ~ 2000 ㏁ from DC 1000 V
judgement method Auto judgement of Good, Bad Auto judgement of Good, Bad
Test procedure Freely set up test procedure as occasion demands.
(Digital type is start testing from hipot(puncture) test)
Input-Output signal Bad, Reset, Enable, Real Time Test, GND Open Protect Bad, Enable, Test On
Dimension W 420 × H 240 × D 480 (㎜)