Product Model : KT-200CD

An electric apparatus including all winding products has to be checked how much current runs at its real working voltage, and by this test, bad winding, short, miss connection of products can be detected, especially the used power of electric apparatus can be presumed. (unload primary idling current as for Trans, Stabilizer,etc, unload current as for Motor, used power as for electric apparatus) This tester represents the current value running through the products during test, in digital figures, decides to be Good or Bad after comparing this value with the previously set standard value(setting the range of H.L optionally), and besides signs out the results in the type of a contact output. Consequently, it is easy to connect and then use this tester with any other automation machine including (Good, Bad, Test Enable)PLC. This tester is especially quick at decision speed, has high measurement accuracy within the wide current range by selecting rectilineal detection circuit of the IC role, and guarantees its precise and quickness in spite of the adverse conditions on the spot due to its security.

Specification

Working voltage : AC100 V or 200 V 50∼60 ㎐
Range of supplied voltage to test products : AC100∼480 V
Range of measurement Current : For 0∼2 A, for 0∼5 A, and for 0∼10 A
Current representation method : Digital 31/2; representation method (1999 unit)
Decision range setting : Respectively setting the range of H.L by digital toggle switch
Accuracy : within ±0.2%
Decision speed : within 0.5 sec
Dimensions : W420, H140, L420 ㎜